Product Information

Shipping & handling is automatically included into listed item price unless oterwise specified. For more information on a item or shipping, please contact me through e-mail. You can find this information on the *Contact Us* page.




Categories
Search
Displaying All products
Displaying products in category
Displaying search results for

3/4 Drop Kit 95.5-04 Tacoma

A high quality lowering kit for the 95.5-04 five lug Tacoma. Two custom steel 4" blocks are standard in this kit, however, Streetacos offers blocks in increments of 1/4", and any size from 1" and up are available for those who don't want the standard 4" blocks. Also available are 2 different height blocks to cure the Taco Lean, and they're usually the difference of 1/2" or 3/4" of a inch in height.

If you can't leave information regarding block size when checking out, just shoot me a e-mail after purchase and I'll contact you and make a note of the block height. My contact info is on the contact us page.

SPECS
Gold coated fine thread grade 8 harware for b/j relocation.
High quality 1/2" diameter grade 5 u-bolts.
Custom steel blocks.
Bolt on rear low profile bump stops.
Instructions for drop kit & home alignment.

Drop kit $192
Shipping $18.80
Checkout $210.80
CA add sales tax $14.88

.

$210.80

A Deposit Area

I added this Deposit box as a way for customers to do a few things listed below. I change the amount when needed for each customers' situation.. See examples below.

#1. Making a deposit for a item.
#2. Paying a discounted amount for a item.
#3. Paying for a large item minus shipping until it's boxed & calculated.
#4. Paying a certain amount with a credit card.
#5. Paying money owed.

$1.00

Ball Joint Flip hardware kit 95.5-04 Tacoma

This is a high quality bolt kit consisting of gold coated fine thread grade 8 hardware for performing the ball joint flip (relocation) on the front of the 95.5-04 Tacoma mini and provides a 3" drop.

The kit has only what's needed, not a bunch of unecessary washers, lock washers, and non locking nuts commonly seen on internet forums. This kit is the right way to do a flip and will save you hours of running around trying to locate the correct bolts.

The kit comes with complete instructions to perform the flip and also the home alignment immediately following the flip.

Bolt Kit $35.00
Shipping $7.00
Total $42.00
CA add sales tax $2.72

$42.00

Battery Box Tray with Cover *remote*

For relocating the battery to the bed or trunk. Comes with cover, available with or w/o holes in cover. All mounting hardware included. Cover hardware is stainless steel. Please specify battery specs: L x W x H. Shipped raw / unpainted. Affordable shipping calculated by zipcode. Price does not include shipping.

$165.95

Battery Tray Optima *OEM location*

This spacer tray allows the use of a Optima battery to be used with the stock hold down clamp and the side tabs keep the battery put so the hold down doesn't have to do all the work.

Simply remove the plastic liner underneath the stock battery, set the new tray in, mark the 2 holes, drill, and enjoy having a new Optima battery that stays put.

I always contact the buyer in regards to battery specs (measurements) since Optima uses a couple different sizes and this is very important regarding the tabs on the tray.

Comes with mounting hardware

Tray $45.01
Shipping $14.00
Total $59.01

$56.75

Battery Tray w/o Cover *remote*

For relocating the battery to the bed or trunk. This tray is tough. All mounting hardware included. Comes painted black. Please specify battery specs: L x W x H. Price includes shipping.

$79.95

Bed Hoist

This bed hoist breaks down for easy transport. Comes with 2,000 lb. winch, side pieces and center bar. Hardware for leg attachments included. Remove your bed with 1 finger in seconds! Battery not included. Shipping calculated by area.

$325.95

Block / Toyota Lean (1) block

One custom steel block sold individually.
Raises the low side to match the high side.
Offered in any height.
Use the comments box when checking out or send email with specs.
Sold without u-bolts.

(1) Block $31.11
shipping $14
Checkout $45.11
CA add sales tax $2.42

$45.11

Block Spacer / Toyota Lean 3/4", 1", or 1.50"

Steel 1/2" spacer bolts to leaf pack to lower high side of truck with the lean.
Safe to use with lowering blocks.
Longer leaf bolt & nylock nut included.
u-bolts not included / your current ones may be long enough.

Use comments box or send email with preferred spacer height and make-model-year of truck.

(1) 3/4", 1" or 1.50" Block Spacer w/bolt & nut $21
shipping $7.80
Checkout $28.80
CA add sales tax $1.63

$28.80

Block Spacer / Toyota Lean 1/2"

Steel 1/2" spacer bolts to leaf pack to lower high side of truck with the lean.
Safe to use with lowering blocks.
Longer leaf bolt & nut included.
u-bolts not included / your current ones may be long enough.

(1) 1/2" Block Spacer w/bolt & nut $14.00
Shipping $7.80
Checkout $21.80
CA add sales tax $1.09

$21.80

Blocks & 1/2" grade 5 u-bolts 2004 & older

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
1/2" diameter true grade 5
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

(2) Blocks $60
(4) u-bolts $58
Parts Total $118
Shipping $16.80
Checkout $134.80
CA add sales tax $9.15

$134.80

Blocks & 1/2" grade 5 u-bolts 2005 & newer

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
1/2" diameter true grade 5
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

(2) Blocks $60
(4) u-bolts $58
Parts Total $118
Shipping $16.80
Checkout $134.80
CA add sales tax $9.15

$134.80

Blocks & 9/16" grade 8 racing u-bolts 2004 & older

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
9/16 "diameter true grade 8
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

(2) Blocks $60
(4) u-bolts $79.95
Parts Total $139.95
Shipping $16.80
Checkout $156.75
CA add sales tax $10.85

$156.75

Blocks & 9/16" grade 8 racing u-bolts 2005 & newer

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
9/16" diameter true grade 8
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

(2) Blocks $60
(4) u-bolts $79.95
Parts Total $139.95
Shipping $16.80
Checkout $156.75
CA add sales tax $10.85

$156.75

Blocks (steel) Fit all Toyota trucks

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

(2) Blocks $60
Shipping $15.80
Checkout $75.80
CA add sales tax $4.65

$75.80

Blocks, bump stops & 1/2" grade 5 u-bolts 2004 & older

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
1/2" diameter true grade 5
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

BUMP STOPS
Bolt into factory holes.
No drilling.
Energy button style low profile bump stop.
These will hold up.

(2) Blocks $60
(4) u-bolts $58
(2) Bump stops low profile $39
Parts Total $157
Shipping $17.80
Checkout $174.80
CA add sales tax $12.17

$174.80

Blocks, bump stops & 1/2" grade 5 u-bolts 2005 & newer

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
1/2" diameter true grade 5
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

BUMP STOPS
Bolt into factory holes.
No drilling.
Energy button style low profile bump stop.
These will hold up.

(2) Blocks $60
(4) u-bolts $58
(2) Bump stops low profile $16
Parts Total $134
Shipping $16.80
Checkout $150.80
CA add sales tax $12.17

$150.80

Blocks, bump stops & 9/16" grade 8 racing u-bolts 2004 & older

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
9/16" diameter true grade 8
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

BUMP STOPS
Bolt into factory holes.
No drilling.
Energy button style low profile bump stop.
These will hold up.

(2) Blocks $60
(4) u-bolts $79.95
(2) Bump stops low profile $39
Parts Total $178.95
Shipping $17.80
Checkout $196.75
CA add sales tax $13.87

$196.75

Blocks, bump stops & 9/16" grade 8 racing u-bolts 2005 & newer

BLOCKS
1" to 4" normally.
Offered in increments of 1/4".
Built to spec for your drop. (tapered or flat, offset pin & hole, no offset pin & hole)
Please list year of truck and truck's rear setup. (used with drop leafs, stock leafs, etc...)
Use comment box when checking out or send email.

U-BOLTS
9/16" diameter true grade 8
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

BUMP STOPS
Bolt into factory holes.
No drilling.
Energy button style low profile bump stop.
These will hold up.

(2) Blocks $60
(4) u-bolts $58
(2) Bump stops low profile $16
Parts Total $155.95
Shipping $16.80
Checkout $172.75
CA add sales tax $12.09

$172.75

Brake Proportioning Valve Bracket LSPV (adjustable - 95.5-04 Tacoma 5 & 6 lug)

For lifted trucks. Replaces braking power lost with lifts. Restores braking. Thick 3/16" material and spacers on rear to clear brake line on axle unlike any other bracket on the market. This is the best bracket offered in the aftermarket. Multiple holes for adjustability.

Comes with mounting hardware and instructions.

LSPV Bracket (load sensing proportioning valve) $20.38
Shipping $7.00
Total $27.38

$27.38

Brake Proportioning Valve Brackt LSPV (lifted 95.5-04 Tacoma 5 & 6 lug)

For lifted trucks. Replaces braking power lost with lifts. Restores braking. Thick 3/16" material and spacers on rear to clear brake line on axle unlike any other bracket on the market. This is the best bracket offered in the aftermarket.

When checking out, use the PayPal comments box or send a e-mail to let me know the rear lift on the truck and I'll build the bracket accordingly. The e-mail address is located on the contact us page.

Comes with mounting hardware and instructions.

LSPV Bracket (load sensing proportioning valve) $16.01
Shipping $7.00
Total $23.01

$23.01

Brake Proportioning Valve LSPV Adjuster 95.5-04 lifted & lowered

This adjuster allows you to choose how much pressure the rear brakes receive. Lowered trucks have too much pressure because the valve thinks there is a load in the bed, and lifted trucks lose pressure. Cut the rod 2" from the valve and slip it through the heim, then bolt the bracket to the valve.

LSPV (load sensing proportioning valve) Adjuster $28.96
Shipping $7.00
Total $35.96

$35.96

Brunes / Tacomaworld / Slider Steps (4)

This is for 4 slider steps to fit 1.75" round sliders & FedEx 4 day shipping once finished.

$178.35

Bump Stops Combo (front & rear) 95 & earlier

So you don't get hit twice for shipping, I've put this front & rear combo bump stop pack together. These fit 95 & earlier Toyota trucks and are popular on Toyotaminis forum. They use Energy bump stops to ensure quality and are adapted to a thick 1/4" plate threaded and welded. They will hold up!

(2) front $42
(2) rear $39
Parts Total $81
Shipping $7.00
Checkout $88
CA add sales tax $6.28

$88.95

Bump Stops Front 95 & earlier Toyota low profile bolt on

Here's my alternative to running nothing, or chopping stock bump stops on lowered trucks. They use Energy super slim button style bumps for quality. These will hold up.

(2) Bump stops $42
Shipping $7.00
Checkout $49
CA add sales tax $3.26

$47.83

Bump Stops low profile Energy

95.5-04 five-lug front & 05+ 5-lug rear. These are the slimmest bumps Energy makes and not commonly stocked on store shelves. They are about 3/8" slimmer than ones commonly found in stores. 2 per pack.

(2) bump stops $16
Shipping $7
Checkout $23
CA add sales tax $1.24

$23.00

Bump Stops Rear 95 & earlier Toyota low profile bolt on

BUMP STOPS
Bolt into factory holes.
No drilling.
Energy button style low profile bump stop.

(2) Bump stops $39
Shipping $7
Checkout $46
CA add sales tax $3.03

$46.00

Bump Stops Rear 95.5-04 Tacoma low profile bolt on

BUMP STOPS
Bolt into factory holes.
No drilling.
Energy button style low profile bump stop.
These will hold up.

(2) Bump stops $39
Shipping $7
Checkout $46
CA add sales tax $3.26

$46.00

Bumper 1st gen Tacoma non wrap single step w/hitch

1.50" x .120 & tough!
Bolt on.
Single step.
Center mounted license plate. (bolts included)
License plate light. (included)
2" receiver Class IV rated.
2 safety chain attachment points.
Shipped FedEx ground.
Calculated by zipcode.
Send e-mail for calculation.
Shipping not included in listed price & can be paid when finished.
Sales Tax added to CA purchase.

$299.00

Bumper 1st gen Tacoma non wrap double step

1.50" x .120 & tough!
Bolt on.
Double step.
Center mounted license plate. (bolts included)
License plate light. (included)
2" receiver class IV rated.
2 safety chain attachment points
Fill plates on steps with dimple die holes.
2 recovery points.
Shipped FedEx ground.
Calculated by zipcode.
Send e-mail for calculation.
Shipping not included in listed price & can be paid when finished.
Sales Tax added to CA purchase.

$395.00

Bumper 1st gen Tacoma non wrap no hitch

1.50" x .120 & tough!
Bolt on.
Single step.
Side mounted license plate. (bolts included)
License plate light. (included)
No hitch.
Shipped FedEx ground.
Calculated by zipcode.
Send e-mail for calculation.
Shipping not included in listed price & can be paid when finished.
Sales Tax added to CA purchase.

$269.00

Bumper 1st gen Tacoma non wrap single step with hitch

1.50" x .120 & tough!
Bolt on.
Single step.
Center mounted license plate. (bolts included)
License plate light. (included)
2" receiver Class IV rated.
2 safety chain attachment points.
Shipped FedEx ground.
Calculated by zipcode.
Send e-mail for calculation.
Shipping not included in listed price & can be paid when finished.
Sales Tax added to CA purchase.

$299.00

Bumper 1st gen Tacoma wrap around

1.50" x .120 & tough!
Bolt on.
Single step.
Center mounted license plate. (bolts included)
License plate light. (included)
2 recovery points.
Shipped FedEx ground.
Calculated by zipcode.
Send e-mail for calculation.
Shipping not included in listed price & can be paid when finished.
Sales Tax added to CA purchase.
*4 runner pictured*

$499.00

Bumper Buddies Towing

These Bumper Buddies bolt on using threaded holes or factory bolts on the bottom of most stock bumpers for a clean factory look, giving you a strong place to hook the safety chains. A common problem when towing with stock bumpers and no receiver hitch. Pictured on a 05 Silverado. Listed price includes priority shipping w/delivery # ($7.65)

$27.60

Bumper wrap around 95.5-04 Tacoma *rear bolt on*

Available with many options, price will vary. Contact me through e-mail for more info. Price does not include shipping.

$499.95

Cross Member Bridge # 1 Tacoma 95.5-04

For 95.5-04 five lug trucks running 3" of leaf drop and 4" blocks. (7" rear drop) Welds into the gas tank rear cross member. You drill a new hole for the gas tank strap 1" over to the left in the cross member and cut the center of it out and weld this in. It keeps the rear drive shaft / u-joint flange from contacting the cross member. Fits standard and extra cab trucks. Shipping is included in listed price.

Item $28
Shipping $14.80

$42.80

Cross Member Bridge # 2 Tacoma 95.5-04

Complete rear gas tank cross member with bridge (notch) for 95.5-04 five lug trucks lowered 7" in the rear. It keeps the rear u-joint flange on the driveshaft from contacting it. Fits standard and extra cab trucks and comes ready to install. Shipping not included in listed price and calculated by zipcode.

Item $99 + shipping

$99.00

Cross Member Bridge # 3 Tacoma 95.5-04

For 95.5-04 standard cabs only. Designed for 7" static drops and bagged five lug trucks. Allows the drive shaft to clear the cross member directly under the rear of the cab. Weld in. Listed price includes shipping.

Item $26.95
Shipping $14.80

$41.75

decals / 1st gen Tacoma Lifted

Available in white or black.
Sold individually.
I pay $3.50 ea.
Thanks for your support!

$5.00

Decals / 1st gen Tacoma Lowered

Available in white or black.
Sold individually.
I pay $3.50 ea.
Thanks for your support!

$5.00

Decals / 2nd gen Tacoma Lifted

Available in white or black.
Sold individually.
I pay $3.50 ea.
Thanks for your support!

$5.00

Decals / 2nd gen Tacoma Lowered

Available in white or black.
Sold individually.
I pay $3.50 ea.
Thanks for your support!

$5.00

Hellwig rear Sway Bar Frame Brackets

Designed to replace the Hellwig universal rear sway bar brackets that are known to come loose and crack or bend the frame on the 95.5-04 5-lug Tacoma. These are a direct bolt on and offset the bar to the right slightly to clear the left shock contact problem associated with the HW bars on the 5-lug trucks.

(2) Brackets $69.72
Shipping $17.80
Total $87.52

$87.52

Hitch / Stealth

Perfect for the lowered mini truck that tows a small trailer. I use mine all the time. It hides up behind the roll pan, clears the spare tire, and uses the stock bolts in the frame. receiver is standard 2" and has 2 attachment points for 2 safety chains. Shipping is USPS or FedEx ground and very affordable.

Finish: bare steel (unpainted)
Shipping: calculated by zipcode (not included in listed price)

$176.97

Luke Dewey / 95.5-04 Rear Bumper

Add Hitch $30
Shipping Total $72.66
Grand Total for changes + shipping $102.66

$102.66

Notch Kit Step (step notch) weld in

Strong step notches made from 2 x 4 .120. These aren't thin weld together pieces commonly found online, they are true rectangle material constructed to fit the 95.5-04 Tacoma frame properly without being huge. Pics of installs are available through e-mail.

Shipping not included in listed price and calculated by zipcode.

$95.00

Notch Kit (c-notch) 95.5-04 Tacoma Bolt On

95.5-04 Tacoma specific. Has a special plate to locate the LSPV (load sensing proportioning valve)

Features:

Plate for the LSPV
screw in Energy bump stops
gold coated grade 8 hardware
1/4" steel ensures strength
includes template & install directions

Kit: $130.00
shipping $16.80
Total $146.80
CA add sales tax $11.38

$146.80

Notch Kit (c-notch) 95.5-04 with bump stops

Kit Includes
Weld in lower pieces with 3/8" threaded holes for bump stops.
Bump Stops are included in this kit.
Weld in pre cut inner walls to box the channel frame.
Pull back and weld stock LSPV bracket to left inner wall.
Complete installation instructions included.
Listed price includes shipping.

Kit $75.00
Shipping $14.00
Total $89
CA add sales tax $6.90

$89.00

Notch Kit (c-notch) weld in 95 & earlier Toyota

This is a weld in kit for 95 and earlier Toyota trucks. Kit comes with 2 weld in pieces ready to go. Simply use the piece to mark the frame, then cut and weld. Complete instructions for install included.

Includes 2 Energy low profile screw in bump stops.

Kit $45.00
shipping $14.00
Total $59.00
CA add sales tax $4.58

$59.00

Notch Kit (c-notch) weld in 95.5-04 w/o bump stops

Kit Includes
Weld in lower pieces with 3/8" threaded holes for bump stops.
Bump Stops not included in this kit.
Weld in pre cut inner walls to box the channel frame.
Pull back and weld stock LSPV bracket to left inner wall.
Complete installation instructions included.
Listed price includes shipping.

Kit $59.00
Shipping $14.
Total $73
CA add sales tax $5.66

$73.00

Notch Kit (c-notch) weld in Toyota 95 & earlier

This is a weld in kit for 95 and earlier Toyota trucks. Kit comes with 2 weld in pieces ready to go. Simply use the piece to mark the frame, then cut and weld. Complete instructions for install included.

Kit does not include bump stops / does have threaded holes for them.

Kit $37
Shipping $7.00
total $44.00
CA add sales tax $3.41

$44.00

QA1 coil over adapter plates 95.5-04 Tacoma 5-lug

Lower Control Arm Plates allow the use of the QA1 fully adjustable racing coil overs on the front of all 95.5-04 Tacoma 5-lug. These are must if you plan on using QA1 coil overs up front. Super slim Energy bump stops are included in this kit.

(2) plates $63.35
(2) bump stops $17.16
shipping $8.00
Total $88.51

$88.51

QA1 coil over adapter plates w/o bump stops 95.5-04 Tacoma 5-lug

Lower Control Arm Plates allow the use of the QA1 fully adjustable racing coil overs on the front of all 95.5-04 Tacoma 5-lug. These are must if you plan on using QA1 coil overs up front. Super slim Energy bump stops are included in this kit.

(2) plates $63.35
shipping $8.00
Total $71.35

$71.35

Racks Bed 95.5-04 Tacoma *universal*

Available with front section only, or both. Price listed includes both. Perfect for carrying 2 surfboards, ladders, or anything that's longer than the bed. Made from 1.5" x .095 wall tubing so they're light, yet strong! Bed mounting hardware included. Shipping calculated by area.

$249.95

Racks Bed RTT *roof top tent* 95.5-04 Tacoma

This rack is perfect for mounting a roof top tent on. Pictures available through e-mail. 1.5" x .095 keeps weight down and strength up. Cross braces are removable to allow the use of the bed. Bed & cross brace mounting hardware included. Available in a break down model that can be shipped. Shipping calculated by area.

$399.95

Shackles 1.5" & 2" lift / Tube 95.5-04 Tacoma

These are true tube racing shackles. Complete with high quality hardware and available for 5 and 6 lug Tacoma. Please use the comments box when checking out to list year, if it's a 5 or 6 lug, and what size shackles you want.

Listed price includes shipping.

Tube Shackles $198.42
Shipping $17.80
Total $216.22

$216.22

Shackles 1.5" & 2" Lift Tacoma 95.5-04 5&6 lug

1.5" or 2" lift shackles. 1/2" thick and Beefy! hardware is top quality.Please use the comments box when checking out to list year of truck, if it'as a 5 lug or 6 lug, and what size shackles you want.

LSPV bracket sold seperately.

(2) Shackles $96.48
Shipping $17.80
Total $114.28

$114.28

Shackles 1.5" & 2" Lift Tundra 2007-2010

This H style shackle is designed to fit between the frame and OEM Tundra hitch on 2007-2011 model trucks. Sold with grade 8 equivelant high quality 14mm metric bolts to ensure a proper fit.

Listed price includes shipping.

Shackles $96.75
shipping w/delivery # $17.80

$114.55

Shock Mounts / 3" weld on

These weld on mounts are 3" long from end to end and great for trucks using the u-bolt flip and need mounts on the axle tube. If you have a 6 lug truck and need the right rear shock to clear the e-brake cable, I have a kit that comes with a 5" right one, and a 3" left one. Beefy 3/16" material with drain hole on bottom.

Listed price includes shipping w/delivery #.

(2) 3" mounts $69.95
shipping $8.80

$78.75

Shock Mounts / 5" & 3" weld on. 5" clears e-brake cable on 6-lug trucks

This kit includes a 5" mount and a 3" mount. The 5" is for the right shock to clear the e-brake cable commonly found on 6-lug Toyota trucks that are using the u-bolt flip. Beefy 3/16" material has drain hole on bottom.

Listed price includes shipping w/delivery #.

(2) mounts $73.95
shipping $8.80

$82.75

Skid Plate / street style 95.5-04 Tacoma 5-lug

This street atyle skid plate is perfect if you're looking to add some bling and want to protect the radiator, sway bar, and front of engine.

Simply undo the 2 bolts on each rail that the cargo hooks attach to, slip the skid plate on, and reattach the bolts and hooks. Offered with 3 holes in the aluminum plate.

Very affordable shipping NOT included in listed price and calculated by zipcode.

$175.00

Skid Plate 05+ 5-lug & X-RUNNER with 2 splash guards

Steel frame with thick aluminum plate. Stainless hardware. Weld on steel plate also available. Holes in plate add $25. Affordable shipping calculated by area. Send e-mail with your zipcode.

$209.95

Skid Plate 05+ Tacoma 5-lug no splash guards w/holes

Replaces the 2 factory braces under the front of the truck. Tube steel frame w/bolt on aluminum plate. Doesn't block oil drain plug. Listed price includes 3 holes with dimple die. Affordable shipping is not included in listed price and is calculated by zipcode.

$205.00

Skid Plate 05+ Tacoma 5-lug w/3 splash guards

Replaces the 2 stock braces under the front of the truck. Has bolt in aluminum main plate, and comes with 3 bolt on splash guards. Painted, polished and ready to install. For 3 holes in main plate add $25. Affordable shipping not included in listed price and calculated by zipcode.

$239.95

Skid Plate off road / style 95.5-04 Tacoma 5-lug *with holes)

Bolt on skid plate uses factory mounting locations. Offered with bolt in aluminum skid plate or weld in steel plate. Affordable shipping is NOT included in listed price and is calculated by zipcode.

$198.95

Skid Plate street / style 95.5-04 Tacoma 5-lug *no holes*

This street atyle skid plate is perfect if you're looking to add some bling and want to protect the radiator, sway bar, and front of engine.

Simply undo the 2 bolts on each rail that the cargo hooks attach to, slip the skid plate on, and reattach the bolts and hooks. Offered with no holes in the aluminum plate.

Very affordable shipping NOT included in listed price and calculated by zipcode

$162.95

Slider Step (1) Standard Round

1 steps (sold individually) Clamp on when going to town, remove easily for wheeling.

Stainless mounting hardware
Fit 1.25" / 1.50" / 1.75" round sliders
(2) Slider Protectors (rubber between step & slider)
Shipped raw / no paint
Painted flat blk for additional $2.50
Powder Coating available at coaters cost / no markup

Price does not included shipping and calculated by zipcode.

$49.00

Sliders / mud flap brackets / bolt on

These fit the leg of any slider with a diameter of 1-1/4" to 1-3/4". If a larger diameter is needed, please e-mail me. These work great with square universal style flaps commony found in stores. Mud flaps NOT included. All mounting hardware is included. Price for the pair includes shipping w/delivery #. ($17.80)

$78.75

Sliders 1.50" Bolt on 2005 - 2012 Tacoma ACLB & DCSB

1.50" .120 HREW.
Bolt on.
Hi Lift tested.
Unique mounting system with 1/2" grade 8 fine thread.
narrow, medium and wide.
rear slider foot / mount for leaf hanger.
1/4" frame plates and gussets.
all seams face upward.
shipping calculated by area / not included in listed price.
shipping can be paid when ready to ship.

$471.55

Sliders 1.50" Weld on 2005-2012 Tacoma ACLB & DCSB

1.50" .120 HREW.
Weld on.
Hi Lift tested.
Narrow, Medium and Wide.
5" x 5" Diamond style frame plates for easy welding.
1/4" gussets.
all seams face upward.
shipping calculated by area / not included in listed price.
shipping can be paid when ready to ship.

$361.60

Sliders 1.75" Bolt on 2005-2012 Tacoma ACLB & DCSB

1.75" .120 HREW.
Bolt on.
Hi Lift tested.
Unique mounting system with 1/2" grade 8 fine thread.
narrow, medium and wide.
rear slider foot / mount for leaf hanger.
1/4" frame plates and gussets.
all seams face upward.
shipping calculated by area / not included in listed price.
shipping can be paid when ready to ship.

$489.95

Sliders 1.75" Weld on 2005-2012 Tacoma ACLB & DCSB

1.75" .120 HREW.
Weld on.
Hi Lift tested.
Narrow, Medium and Wide.
5" x 5" Diamond style frame plates for easy welding.
1/4" gussets.
all seams face upward.
shipping calculated by area / not included in listed price.
shipping can be paid when ready to ship.

$380.00

Sliders 4runner *weld on*

These sliders are made from 1-3/4" x 120 HREW steel. They are sold with loose legs, frame plates and gussets. Pictures are available through e-mail of them installed on a 96 4R.

$347.00

Sliders Bolt on 1.75" 2005-2012 Tacoma ACLB & DCSB w/rear side protection

1.75" .120 HREW.
Bolt on.
Rear kick up's offer side protection / ACLB only.
Hi Lift tested.
Unique mounting system with 1/2" grade 8 fine thread.
narrow, medium and wide.
rear slider foot / mount for leaf hanger.
1/4" frame plates and gussets.
all seams face upward.
shipping calculated by area / not included in listed price.
shipping can be paid when ready to ship.

$564.95

Sliders Steps (2) Standard Round

2 steps (pair) Clamp on when going to town, remove easily for wheeling.

Stainless mounting hardware
Fit 1.25" / 1.50" / 1.75" round sliders
(4) Slider Protectors (rubber between step & slider)
Shipped raw / no paint
Painted flat blk for additional $5
Powder Coating available at coaters cost / no markup

Price does not included shipping and calculated by zipcode.

$90.00

Sticker 1st gen lowered

Get these while they're available because sometimes they aren't. The original Streetacos sticker is back for a limited time!

Please specify white or black when checking out. (white pictured)

$5.00

Sticker 2nd gen lowered

Get these while they're available because sometimes they aren't. The original Streetacos sticker is back for a limited time!

Please specify white or black when checking out.

$5.00

Sticker Beefed off road

Get these while they're available because sometimes they aren't. The original Streetacos sticker is back for a limited time!

Please specify white or black when checking out.

$5.00

Sway Bar Bushings / Energy 95.5-04 Tacoma 5-lug (front bushings)

These Energy sway bar bushings fit 95.5-04 2WD 5-lug trucks using the stock front sway bar. These are non-greaseable. End bushings sold separately. Price includes shipping & handling. (bushings $24.95, shipping w/delivery # $8.80)

$33.75

Sway Bar Bushings 95.5-04 Tacoma 5-lug (end bushings)

These Energy bushings fit the OEM end links for the 95.5-04 Tacoma 5-lug. This kit is end bushings only, no bolt, simply use your stock bolts & sleeves. 2 front bushings sold separately. Price includes shipping and handling. (bushings $14.95 shipping w/delivery # $8.80)

$23.75

Sway Bar Bushings Energy Tacoma 4x4/Prerunner (complete kit)

These Energy sway bar bushings fit 95.5-04 Tacoma 4x4 and Prerunner trucks using the stock front sway bar. This is a complete kit. Price includes shipping & handling. (bushing kit $33.15 shipping w/delivery # $8.80)

$41.95

Sway Bar Bushings Energy/poly Tacoma 95.5-04 s-runner

These Energy sway bar bushings fit the 95.5-04 s-runner trucks using the stock front sway bar. They also fit the aftermarket Addco and Hellwig front bars. Price includes shipping & handling. (bushing kit $27.15 shipping w/delivery # $ 8.80)

$35.95

Tacoma 05 & newer 1-1/2" (4" & lower rear lifts)

Drops the carrier bearing 1-1/2" to kill drive line vibrations on trucks 4" and lower in the rear. The top tower utilizes a factory hole in the cross member above to help rid the area of unwanted flex.

Quality hardware included and painted black.

Bracket $62
Shipping $15
Checkout $77
CA add sales tax $4.81

$77.00

Tacoma 05+ & newer 2-1/4" (5" & higher rear lifts)

Drops the carrier bearing 2-1/4" for trucks with rear lifts at 5" and higher. Top tower uses a factory hole in the cross member and helps rid this area of unwanted flex.

Quality mounting hardware included.
Finish: Black paint.

Bracket $64
Shipping $15
Checkout $79
CA add sales tax $4.96

$79.95

Tacoma 95-04 1-1/2" (4" & lower rear lifts)

Drops the carrier bearing 1-1/2" for trucks with rear lifts at 4" and below. Top tower uses a factory hole in the cross member and helps rid this area of unwanted flex.

Quality mounting hardware included.
Finish: Black paint.

Bracket $62
Shipping $15
Total $77
CA add sales tax $4.81

$77.00

Tacoma 95-04 2-/14" (5" & higher rear lifts)

Drops the bearing 1-1/2" for trucks with rear lifts at 4" and below. Top tower uses a factory hole in the cross member and helps rid this area of unwanted flex.

Quality mounting hardware included.
Finish: Black paint.

Bracket $64
Shipping $15
Checkout $79
CA add sales tax $4.96

$79.00

Tire Carrier 2005-2012 Tacoma

Uses the 2 stock front bed bolts to prevent pull through commonly found with aftermarket carriers, breaks in half for affordable shipping, has tab for cable lock to prevent tire theft, and is available in T handle or ratchet strap hold down. Made from 1-1/2" .120 tube. Rear foot uses 2 nut plates under the bed to prevent pull through.

Shipping not included in listed price and calculated by zipcode. More pictures available through e-mail.

$299.00

Tire Carrier Y strap style

Uses Y srap to secure the tire. Special nut plates for under the bed to prevent pull through normally associated with aftermarket carriers. You can use a cable lock to prevent theft. Comes with mounting hardware.

Shipping not included in listed price and calculated by zipcode. More pictures available through email.

$289.00

Tundra 06 & earlier 1-1/2" (4" & lower rear lift)

Drops the bearing 1-1/2" for trucks with REAR lifts at 4" and below. Top tower uses a factory hole in the cross member and helps rid this area of unwanted flex.

quality mounting hardware included.
Finish: Black paint.

Bracket $62
Shipping $15
Checkout $77
CA add sales tax $4.89

$77.00

Tundra 06 & earlier 2-1/4" (5" & higher rear lifts)

Drops the bearing 2-1/4" for trucks with rear lifts at 5" and higher in the rear. Top tower uses a factory hole in the cross member and helps rid this area of unwanted flex.

Quality hardware included & painted black.

Bracket $64.95
Shipping $15
Checkout $79.95
CA add sales tax $5.04

$79.21

Tundra 07 & newer 1-1/2" (4" & lower rear lift)

Drops the bearing 1-1/2" for trucks with rear lifts at 4" and below. Top tower uses a factory hole in the cross member and helps rid this area of unwanted flex.

Quality mounting hardware included.
Finish: Black paint.

Bracket $62
Shipping $15
Total $77
CA add sales tax $4.81

$77.00

Tundra 07 & newer 2-1/4" (5" & higher rear lift)

Drops the bearing 2-1/4" for trucks with 5" & higher rear lifts.

Bracket $64
Shipping $15
Checkout $79
CA add sales tax $4.96

$79.00

u-bolts 1/2" diameter high quality

U-BOLTS
1/2" diameter true grade 5
High nuts
Extra thick washers
Excellent quality.
Threads cut shallower than other u-bolts for less play in nut.
Custom made for block & axle spec at spring shop.

(4) 1/2" diameter grade 5 u-bolts $58
Shipping $14.80
Checkout $72.80
CA add sales tax $4.50

$72.80

u-bolts 9/16" grade 8 racing

These are the real deal. True grade 8 with special high nuts and extra thick washers. Fat 9/16" diameter will fit through the u-bolt plates without any drilling.

(4) 9/16" grade 8 u-bolts $79.95
Shipping $14.80
Checkout $94.75
CA add sales tax $6.20

$94.75